Fuel basics
Energy, density, combustion, octane and cetane, and the units used to compare fuels.
Why these ideas come first
Every fuel comparison rests on three questions: how much energy a fuel holds, how it burns, and how that energy was counted. The articles in this topic answer them in plain terms, so the numbers elsewhere on the site stop looking like a puzzle.
Start with vocabulary. People say fuel, energy source and energy carrier as if they meant the same thing. The article on those three terms shows why electricity and hydrogen sit in a different place than gasoline or wood.
Counting energy
"Which fuel has more energy?" has no single answer. The answer depends on the yardstick, per kilogram or per liter, and the order of fuels can change between the two. Energy density explains why, and why a light fuel can still take up a lot of room.
Then comes the unit problem. Fuel data appears in joules, kilowatt-hours and British thermal units, sometimes in one report. The unit guide shows how they convert, so you can read any source with confidence.
There is a third trap, the heating value. A fuel's energy can be counted with or without the heat given up when the water vapor made by burning condenses. Higher vs lower heating value defines both. In the Comparator, lower heating value is the default, and a higher heating value appears only where an official source publishes it. The site never converts one into the other.
Ratings, then numbers
Octane is one of the most quoted numbers about fuel, and one of the most misunderstood. What an octane rating actually measures describes how a fuel resists igniting too early in an engine, and it tests the common belief that higher octane means more energy. Cetane number is the diesel counterpart and has its own article, so the two ratings are not confused.
When the concepts feel clear, compare gasoline, diesel and hydrogen in the Comparator. Show the energy in MJ, kWh or Btu, sort by different measures, and watch each idea turn into a real number with a stated basis. The numbers describe the fuels themselves, not their cost or how they perform in a particular engine.
The 9 articles in this topic
-
Fuel, Energy Source or Energy Carrier? What Each Term Means
A fuel is a material used up for heat or power, a source is where energy starts, and a carrier moves it. See how gasoline, hydrogen and electricity sort.
-
How Combustion Works: Fuel, Oxygen and Heat
Combustion is a fast reaction between a fuel and oxygen that releases heat. Follow the chemistry of gasoline and wood, from complete to incomplete burning.
-
Energy Density Explained: Per Kilogram vs Per Liter
Hydrogen leads per kilogram but trails per liter. See why energy density rankings flip, with LHV figures for gasoline, diesel, ethanol and hydrogen.
-
Btu, Joule and kWh: How Energy Units Convert
One kWh equals 3.6 MJ or about 3,412 Btu. Learn what each unit measures, the exact factors, and how to convert a gallon of propane step by step.
-
Higher vs Lower Heating Value: What the Difference Means
HHV counts the heat released when combustion water vapor condenses; LHV does not. See the gap for hydrogen, natural gas and gasoline, and which to use.
-
What an Octane Rating Actually Measures
An octane rating shows how well gasoline resists knock, not how much energy it holds. See RON, MON, pump grades and why ethanol rates high yet holds less.
-
Cetane Number: Diesel's Version of Octane
Cetane number rates how fast diesel ignites after injection. See how it differs from octane, typical values, and why it is not a measure of energy content.
-
Solid, Liquid and Gaseous Fuels: Why Physical State Matters
Fuels are solids, liquids or gases depending on their molecules, temperature and pressure. See how state changes storage, handling and energy per volume.
-
Gasoline Gallon Equivalent: A Common Yardstick for Different Fuels
A gasoline gallon equivalent (GGE) is the amount of fuel with the energy of one gallon of gasoline. See the formula, worked examples and why factors differ.








