Solid, Liquid and Gaseous Fuels: Why Physical State Matters
A fuel is a solid, a liquid or a gas depending on the size of its molecules and on the temperature and pressure around it. Physical state matters because it decides how a fuel is stored, moved and measured, and how much energy fits into a given space.
Coal, gasoline, propane and natural gas cover all three states, and propane shows that the label is not fixed. Below you will find what sets a fuel's state, how each state is handled, and a worked comparison of energy per liter that explains why gases are compressed or cooled before they serve as vehicle fuels.
What decides a fuel's physical state
Two things decide it: the molecules and the conditions. Natural gas is a mixture of hydrocarbons with carbon numbers typically from one to four, and a Sandia National Laboratories paper says it exists in vapor form at standard conditions. The Alternative Fuels Data Center (AFDC), a U.S. Department of Energy resource, calls natural gas predominantly methane (CH4), the smallest hydrocarbon. Gasoline is a blend of larger molecules that stays liquid at ambient conditions. The same Sandia paper draws its sample gasoline-range molecules with eight carbon atoms.
Coal is a different case. The U.S. Energy Information Administration (EIA) describes it as a dark sedimentary rock that burns and is rich in carbon and hydrocarbons. It is a solid from the start, with no single molecule to describe it.
Conditions can override the default. EIA's page on hydrocarbon gas liquids says these compounds, which include propane (C3H8), occur as gases at atmospheric pressure and as liquids under higher pressures, and that they can also be liquefied by cooling. AFDC reports that a vehicle propane tank holds the fuel as a liquid at about 150 pounds per square inch (psi), or roughly 1.03 megapascals. Natural gas becomes a liquid when it is super-cooled to -260°F (-162°C). So "state" is best read as the form a fuel has at ordinary conditions and the form in which it is kept. More on the two gaseous fuels is in propane and LPG explained and natural gas composition and forms.
How state shapes storage and handling
| Fuel | State at ordinary conditions | How it is kept and sold | Energy content (HHV) |
|---|---|---|---|
| Coal (bituminous) | Solid | Reported by weight | 28.99 MJ/kg (12,465 Btu/lb) |
| Gasoline (no-ethanol value) | Liquid | Liquid at ambient conditions | 34.66 MJ/L (124,340 Btu/gal) |
| Propane | Gas at atmospheric pressure | Pressurized liquid | 25.48 MJ/L (91,420 Btu/gal) |
| Natural gas (CNG), uncompressed gas | Gas | Gas at low pressure, or compressed as CNG | 0.04057 MJ/L (1,089 Btu/ft³) |
The natural gas figure is per volume of gas at 32°F and 1 atm, not per liter of a compressed tank. The unit in the last column is a clue to the state. The EPA lists coal's heat content per short ton, a weight. Gasoline and propane are counted in gallons. Natural gas is counted in cubic feet, here from an Oak Ridge National Laboratory (ORNL) table of gaseous fuels at those conditions.
A liquid such as gasoline needs no pressure or cooling to stay liquid. A gas is harder to keep in a small space. AFDC says compressed natural gas (CNG) is squeezed to less than 1% of its volume at standard atmospheric pressure and stored on vehicles at up to 3,600 psi (about 24.8 megapascals). The Sandia authors note that gaseous fuels tend to be difficult to store at high energy density and often need high-pressure tanks, cryogenic systems, or both. Pressurized and cryogenic fuels have their own handling rules, so follow manufacturer instructions and local rules. For the wider storage picture, see why some fuels store better than others.
Solids ask for a different kind of handling, and a different yardstick. EIA sorts coal into four ranks, anthracite, bituminous, subbituminous and lignite, by carbon content and heat output. The rank comparison lives in coal ranks and energy content.
Energy per volume: a worked comparison
The table puts a number on what state does to energy per volume. Using the HHV figures for liquids and gas:
- Gasoline: 34.66 MJ/L ÷ 0.04057 MJ/L = about 850
- Propane as a pressurized liquid: 25.48 MJ/L ÷ 0.04057 MJ/L = about 630
A liter of no-ethanol gasoline holds about 850 times the energy of a liter of uncompressed natural gas at 32°F and 1 atm, and a liter of liquid propane holds about 630 times. AFDC reports a jump of the same kind for propane itself: as a pressurized liquid it packs 270 times the energy density it has as a gas. That gap is why gaseous fuels are compressed or cooled before they are used as vehicle fuels. Compression does not add energy to each standard cubic foot. It fits more standard cubic feet into the tank.
Solids need their own arithmetic. One gallon of no-ethanol gasoline holds 124,340 Btu (HHV), and bituminous coal holds 12,465 Btu per pound (HHV), so 124,340 ÷ 12,465 = 9.98. About 10 pounds (4.5 kilograms) of bituminous coal matches the energy of a gallon of gasoline on this basis. The sources report coal by weight, so the Comparator shows no per-volume figure for it.
Weight tells a different story. On a lower heating value (LHV) basis, a separate comparison from the HHV figures above, gasoline holds 43.45 MJ/kg (18,680 Btu/lb), propane 46.22 MJ/kg (19,873 Btu/lb) and compressed natural gas 46.89 MJ/kg (20,160 Btu/lb). The gases do not fall behind per kilogram. They fall behind per liter. Energy density by mass and volume explains why both measures exist, and higher vs lower heating value explains the two bases. To see all four fuels together, compare coal, gasoline, natural gas and propane.
Common mistakes
- Treating a fuel's state as fixed. Propane is a gas at atmospheric pressure but is kept as a liquid in its tank, and natural gas becomes a liquid at about -260°F.
- Thinking a liquefied fuel is a different fuel. LNG is natural gas cooled to a liquid, and liquid propane returns to gas for burning once pressure is released.
- Assuming compression adds energy. Compression packs more gas into the same tank. The energy in each standard cubic foot does not change.
- Comparing numbers across states without checking units. Btu per pound, per gallon and per cubic foot are different yardsticks, and a conversion is needed before any ranking.
- Expecting a per-volume number for every fuel. The sources report coal by weight, so the Comparator shows no energy-per-volume figure for it.
Frequently asked questions
Why is propane stored as a liquid if it is a gas?
At atmospheric pressure propane is a gas, but under pressure it becomes a liquid that takes far less room. AFDC says liquid propane packs 270 times the energy density of propane gas, and that vehicle tanks hold it at about 150 psi. When pressure is released, it vaporizes and can be burned.
Is natural gas ever a liquid?
Yes. Liquefied natural gas (LNG) is natural gas cooled to about -260°F, according to AFDC. CNG stays a gas but is compressed to less than 1% of its volume at standard atmospheric pressure and stored at pressures of up to 3,600 psi.
Can coal be turned into a gas?
Yes, by a chemical process. EIA reports that the Great Plains Synfuels Plant in North Dakota converts lignite to synthetic natural gas and sends it through natural gas pipelines to consumers in the eastern United States.
Which physical state holds the most energy in a given space?
Among the fuels here, liquids do. On an HHV basis gasoline holds 34.66 MJ/L and liquid propane 25.48 MJ/L, against 0.04057 MJ/L for uncompressed natural gas at 32°F and 1 atm. The sources report coal by weight, so no per-volume value is available for it.
Sources
- Coal explained: U.S. Energy Information Administration (EIA). Accessed November 13, 2026.
- Hydrocarbon gas liquids explained: U.S. Energy Information Administration (EIA). Accessed November 13, 2026.
- Propane Fuel Basics: Alternative Fuels Data Center, U.S. Department of Energy. Accessed November 13, 2026.
- Natural Gas Fuel Basics: Alternative Fuels Data Center, U.S. Department of Energy. Accessed November 13, 2026.
- Fuel Properties Comparison: Alternative Fuels Data Center, U.S. Department of Energy. Accessed November 13, 2026.
- GHG Emission Factors Hub: U.S. Environmental Protection Agency. Accessed November 13, 2026.
- Lower and Higher Heating Values of Gas, Liquid and Solid Fuels (Biomass Energy Data Book, Appendix A, 2011): Oak Ridge National Laboratory, copy hosted by the University of Illinois. Accessed November 13, 2026.
- Fuels and the Impact of Fuel Composition on Engine Performance: Sandia National Laboratories, via the Office of Scientific and Technical Information. Accessed November 13, 2026.
Spotted something wrong or out of date? Tell us through the corrections page. We answer within 10 business days.