Coal Ranks Explained: From Lignite to Anthracite
Coal is sorted into four ranks, from lignite at the bottom to anthracite at the top, and a higher rank generally means more carbon, less moisture and more energy per ton. The U.S. Environmental Protection Agency (EPA) gives default heat contents of 14.21 million Btu (mmBtu) per short ton for lignite and 25.09 mmBtu per short ton for anthracite, which is about 1.8 times as much (25.09 ÷ 14.21 = 1.77). In metric terms that is 16.5 and 29.2 MJ/kg.
Rank describes how far buried plant matter has changed. It speaks to carbon and heat content, not to every property an engineer might care about. This article sets out what rank means, lines the four ranks up on carbon, energy and CO2 from burning, works through how much of each it takes to supply the same energy, and notes how the ranks are used. How coal comes to exist in the first place is the subject of how fossil fuels form.
What rank means
The U.S. Geological Survey (USGS) explains that rank refers to steps in a slow natural process called coalification, in which buried plant matter becomes denser, drier, more carbon-rich and harder. Peat, a soft material of partly decayed plant matter, is the precursor to coal and not a rank of it. The U.S. Energy Information Administration (EIA) says coal falls into four main ranks and that the ranking depends on carbon content and heat energy.
In the United States the formal classes come from ASTM International, and the USGS glossary spells them out. Lignite is a brownish-black, low-rank coal under 8,300 Btu per pound on a moist, mineral-matter-free basis. That basis counts the coal's own moisture but leaves out mineral ash. Subbituminous coal sits between 8,300 and 11,500 Btu per pound. Bituminous coal is above 10,500 Btu per pound with under 86% fixed carbon, and anthracite has 86% or more fixed carbon and 14% or less volatile matter (both on a dry, mineral-matter-free basis). The Btu ranges for subbituminous and bituminous overlap because the classes also depend on other tests, such as fixed carbon, volatile matter and whether the coal cakes (agglomerates) in a lab test.
The four ranks side by side
| Rank | Carbon content (EIA) | ASTM class (USGS) | Share of U.S. production, 2022 (EIA) | Mined mainly in (EIA) |
|---|---|---|---|---|
| Lignite | 25% to 35% | Under 8,300 Btu/lb | 8% | North Dakota and Texas |
| Subbituminous | 35% to 45% | 8,300 to 11,500 Btu/lb | About 46% | Wyoming |
| Bituminous | 45% to 86% | Over 10,500 Btu/lb; under 86% fixed carbon | About 46% | West Virginia, Illinois, Pennsylvania, Kentucky, Indiana |
| Anthracite | 86% to 97% | 86% or more fixed carbon; 14% or less volatile matter | Under 1% | Northeastern Pennsylvania |
EIA's carbon percentages and ASTM's fixed-carbon percentages are different measures, so compare each set only with itself. Energy numbers come from EPA, which publishes default heat contents on a higher heating value (HHV) basis. EPA notes that a heat content from the fuel supplier is preferable when one exists, so these are typical values, not measurements of a particular coal.
| Rank | Energy per short ton | Energy per kg | CO2 from burning, per energy |
|---|---|---|---|
| Lignite | 14.21 mmBtu | 16.5 MJ/kg (7,105 Btu/lb) | 97.72 kg per mmBtu (92.6 g/MJ) |
| Subbituminous | 17.25 mmBtu | 20.1 MJ/kg (8,625 Btu/lb) | 97.17 kg per mmBtu (92.1 g/MJ) |
| Bituminous | 24.93 mmBtu | 29.0 MJ/kg (12,465 Btu/lb) | 93.28 kg per mmBtu (88.4 g/MJ) |
| Anthracite | 25.09 mmBtu | 29.2 MJ/kg (12,545 Btu/lb) | 103.69 kg per mmBtu (98.3 g/MJ) |
Two things stand out. First, energy climbs steeply from lignite to bituminous, then barely moves: anthracite's default is only 0.6% above bituminous (25.09 ÷ 24.93 = 1.006), even though EIA says anthracite generally has the highest heating value of all ranks. Second, higher rank does not mean less CO2 per unit of energy. Bituminous is the lowest of the four in EPA's table and anthracite the highest. These are combustion figures only. The CO2 per unit of energy article compares coal with other fuels on the same footing. The Comparator's coal record is bituminous, and you can compare coal and diesel there.
Worked example: how much coal supplies 100 million Btu?
Dividing 100 mmBtu by each rank's default heat content gives the tonnage needed (1 short ton is 0.907 metric ton):
- Lignite: 100 ÷ 14.21 = 7.04 short tons (6.38 metric tons).
- Subbituminous: 100 ÷ 17.25 = 5.80 short tons (5.26 metric tons).
- Bituminous: 100 ÷ 24.93 = 4.01 short tons (3.64 metric tons).
- Anthracite: 100 ÷ 25.09 = 3.99 short tons (3.62 metric tons).
Lignite takes about 1.75 times the weight of bituminous for the same energy (7.04 ÷ 4.01). The CO2 from burning that energy moves far less. Multiplying 100 mmBtu by EPA's factors gives 9,772 kg for lignite, 9,717 kg for subbituminous, 9,328 kg for bituminous and 10,369 kg for anthracite. The highest is only about 11% above the lowest (10,369 ÷ 9,328 = 1.11).
How the ranks are used
EIA describes bituminous coal as used for electricity generation and as a fuel and raw material for making coke, which the iron and steel industry uses. Anthracite goes mainly to the metals industry. Lignite is crumbly with high moisture content, which contributes to its low heating value, and EIA notes that the Great Plains Synfuels Plant in North Dakota converts lignite to synthetic natural gas.
Across all ranks, EIA reports that electric power used 91.7% of the roughly 513 million short tons of coal consumed in the United States in 2022. How that fuel becomes electricity is explained in how power plants turn fuel into electricity. The pollutants released when coal burns are covered in air pollutants from burning fuels.
Common mistakes
- Giving coal one energy value. EPA's defaults run from 14.21 to 25.09 mmBtu per short ton, a spread of about 1.8 times.
- Expecting anthracite to dwarf bituminous. In EPA's defaults the gap is 0.6%, and real samples vary.
- Assuming higher rank means lower CO2 per energy. Bituminous has the lowest factor in EPA's table, and anthracite the highest.
- Treating peat as the lowest rank. USGS calls peat the precursor to coal, not a rank.
- Reading default heat contents as lab results. EPA says a supplier's value is preferable when available.
- Mixing carbon measures. EIA's carbon content and ASTM's fixed carbon are not the same quantity.
Frequently asked questions
What are the four ranks of coal?
From lowest to highest: lignite, subbituminous, bituminous and anthracite. EIA and USGS both use these four. Each step up generally has more carbon, less moisture and a higher heating value, although the top two ranks are close in EPA's default energy per short ton.
Which rank of coal has the most energy?
Anthracite generally has the highest heating value, per EIA. EPA's defaults put it at 25.09 mmBtu per short ton (29.2 MJ/kg), just above bituminous at 24.93. Lignite is lowest, at 14.21 mmBtu per short ton (16.5 MJ/kg), and subbituminous sits between lignite and bituminous.
Why does lignite hold so little energy?
EIA and USGS both point to high moisture content. EIA calls lignite crumbly with high moisture, which contributes to its low heating value, and USGS says it has the least carbon of the four ranks. It is also the least altered by coalification.
Is peat a type of coal?
No. USGS describes peat as the precursor to coal: a soft, organic material made of partly decayed plant and mineral matter. It becomes coal through coalification. Rank applies only once the material is coal, starting with lignite.
Sources
- Coal explained: U.S. Energy Information Administration (EIA). Accessed November 13, 2026.
- Use of coal: U.S. Energy Information Administration (EIA). Accessed November 13, 2026.
- What are the types of coal?: U.S. Geological Survey. Accessed November 13, 2026.
- Circular 891 - Glossary of Coal Classification System and Supplementary Terms: U.S. Geological Survey. Accessed November 13, 2026.
- GHG Emission Factors Hub (2025 edition, Table 1 Stationary Combustion): U.S. Environmental Protection Agency. Accessed November 13, 2026.
Spotted something wrong or out of date? Tell us through the corrections page. We answer within 10 business days.