Biofuels and alternatives

Ethanol Fuel Explained: E10, E15 and E85

A beautiful cornfield at sunset, showcasing the vibrant growth and serene countryside landscape
Photo by Todd Trapani on Pexels. A general illustration, not evidence for any number.

Ethanol fuel is an alcohol, CH3CH2OH, made by fermenting plant sugars and starches and then mixed into gasoline. The number after the "E" on a pump or in a blend name is the share of ethanol by volume. E10 is 10 percent ethanol, E15 is 10.5 to 15 percent, and E85 is 51 to 83 percent.

Most American drivers already use ethanol without choosing it: the U.S. Department of Energy says more than 98 percent of U.S. gasoline contains some. What is less obvious is that each blend comes with its own vehicle rules and its own energy per gallon, and that two different emissions numbers get attached to ethanol. This article sorts out the labels, shows the blending arithmetic, and keeps the emissions measures apart.

What the E number means

Ethanol is a clear, colorless liquid, also called ethyl alcohol. Its formula is the same whether it comes from corn or from wood chips. Fuel ethanol has a denaturant added to make it undrinkable, according to the U.S. Energy Information Administration (EIA).

Common ethanol blends and who can use them, from DOE's Alternative Fuels Data Center (AFDC), EIA and EPA.
BlendEthanol by volumeVehicles and engines
E0NoneEthanol-free gasoline, available in some areas for equipment such as boats and landscaping tools
E1010%Any gasoline-powered vehicle; sold in every state
E1510.5% to 15%Light-duty vehicles of model year 2001 and newer, with conditions and a required pump label
E85 (flex fuel)51% to 83%, by season and locationFlexible-fuel vehicles only; not approved for gasoline-only models

The rules behind the E15 row come from the Environmental Protection Agency (EPA). It granted partial waivers allowing gasoline with more than 10 percent and up to 15 percent ethanol for model year 2001 and newer light-duty vehicles. A separate misfueling rule prohibits using gasoline with more than 10 percent ethanol in vehicles and engines the waivers do not cover, and E15 pumps must carry a label. Flexible-fuel vehicles look like ordinary gasoline models, so AFDC points owners to Fueleconomy.gov to check. Blender pumps can offer in-between blends such as E25 and E30 for those vehicles.

How ethanol is made

Yeast ferments the sugars in a plant into alcohol. With corn, the starch in the kernels is first broken down into sugar, then fermented. AFDC says 94 percent of U.S. ethanol is made from corn grain starch, and EIA says nearly all of it is. Brazil, the second-largest producer after the United States, makes most of its ethanol from sugar cane.

A second family, cellulosic ethanol, starts from the tough fibers of wood chips, crop residues, switchgrass and miscanthus. It ends up as the same molecule, so a gallon of cellulosic ethanol and a gallon of corn ethanol are chemically identical.

Ethanol also has a higher octane number than gasoline. AFDC notes that a lower-octane gasoline is blended with 10 percent ethanol to reach the standard 87 octane. What octane does and does not measure is covered in what an octane rating measures, and the gasoline side of the blend in what gasoline is made of.

Energy in each blend, with the arithmetic

Ethanol holds less energy per gallon than gasoline. AFDC lists the lower heating value of ethanol (E100) at 76,330 Btu per gallon (21.27 MJ/L), against 116,090 Btu per gallon (32.36 MJ/L) for ethanol-free gasoline. A blend lands in between, and a simple volume-weighted average predicts where. The method assumes the two liquids mix without changing volume.

For E10, the blend is 90 percent gasoline and 10 percent ethanol:

  • 0.90 × 116,090 = 104,481
  • 0.10 × 76,330 = 7,633
  • Total: 112,114 Btu per gallon

That matches the low end of AFDC's own range for E10, so the method works. The same steps give the other rows.

Estimated lower-heating-value energy per gallon by blend (volume-weighted average of AFDC values).
BlendBtu per gallonMJ per literCompared with E0
E0116,09032.36baseline
E10112,11431.25about 3% lower
E15110,12630.69about 5% lower
E85, at 51% ethanol95,81226.70about 17% lower
E85, at 83% ethanol83,08923.16about 28% lower
E10076,33021.27about 34% lower

This is energy per gallon of fuel. It is not a claim about how far any vehicle travels. The E85 rows are two points of a wide range because the real blend moves with season and location. For the full property side by side, see the ethanol and gasoline comparison. Energy density by mass and volume explains why per-gallon and per-kilogram rankings can differ.

Two emissions numbers, kept apart

EPA's emission factors list ethanol's CO2 from burning at 64.87 g per MJ (68.44 kg per million Btu), against 66.56 g per MJ (70.22 kg per million Btu) for motor gasoline. That CO2 is biogenic, meaning the carbon came from a plant that took it from the air. EPA lists ethanol among biomass fuels and points to separate guidance on how to count them in an inventory.

A life-cycle figure answers a different question. It adds farming, land-use change, transport, production, distribution and use. For corn-starch ethanol from a natural-gas-fired dry mill (2022 average), EPA's results workbook shows 77.2 kg CO2e per million Btu, against 98.2 for the 2005 average gasoline baseline, about 21 percent lower. EPA's 95 percent range for ethanol runs from 66.1 to 91.1 because land-use change is uncertain. Fuel production (27.9) and land-use change (27.8) are the largest pieces. EPA's program sets a 20 percent reduction threshold for conventional renewable fuel such as corn-starch ethanol.

Do not put the 64.87 and the 77.2 side by side as if one were a correction of the other. They measure different things: one counts what is released when the fuel burns, the other counts the whole chain, in CO2 equivalent. Combustion vs life-cycle emissions explains why both exist. For a close relative, see methanol as a fuel.

Common mistakes

  • Reading E85 as 85 percent ethanol all year. The real range is 51 to 83 percent, depending on location and season.
  • Using E15 in any gasoline engine. EPA's waivers cover light-duty vehicles of model year 2001 and newer, and a separate misfueling rule prohibits higher-ethanol gasoline in vehicles and engines the waivers do not cover.
  • Mixing up octane and energy. Ethanol raises octane but holds less energy per gallon, which is why the blends in the table fall as ethanol rises.
  • Assuming all ethanol is corn. Corn is the main U.S. feedstock, but sugar cane is common in Brazil, and cellulosic ethanol uses fibers like wood chips.
  • Treating ethanol's CO2 as zero. EPA lists it as biogenic and counts it separately, and the life-cycle figure for ethanol is still well above zero.

Frequently asked questions

What does E10 mean?

E10 is gasoline with 10 percent ethanol and 90 percent gasoline by volume. It is sold in every state, and AFDC says EPA approves it for any conventional gasoline-powered vehicle. EIA says nearly all U.S. motor gasoline is about 10 percent ethanol.

What is the difference between E15 and E85?

E15 holds 10.5 to 15 percent ethanol and is approved for model year 2001 and newer light-duty vehicles. E85 holds 51 to 83 percent ethanol and works only in flexible-fuel vehicles. Gasoline-only models are not approved for E85.

Why is ethanol blended into gasoline at all?

AFDC says it is used to oxygenate the fuel, and ethanol has a higher octane number than gasoline. Blending 10 percent ethanol into a lower-octane gasoline reaches the standard 87 octane. The U.S. Renewable Fuel Standard also sets federal requirements for using renewable fuels such as ethanol.

Is there gasoline without ethanol?

Yes, in some areas. EIA says ethanol-free gasoline, E0, may be available for equipment such as boats and landscaping tools. Always follow the equipment maker's instructions and local rules for the fuel to use.

Sources

Spotted something wrong or out of date? Tell us through the corrections page. We answer within 10 business days.