Fuels in everyday life and history

A Short History of the Internal Combustion Engine

Close-up of a vintage car engine on display at a classic car show outdoors
Photo by Tom Fisk on Pexels. A general illustration, not evidence for any number.

No single person invented the internal combustion engine. It was built up in steps: Étienne Lenoir's gas engine of 1860, Nikolaus Otto's four-stroke engine of 1876, small engines made for vehicles in the 1880s, and Rudolf Diesel's compression-ignition engine of the 1890s. Which name belongs on the invention depends on the milestone you mean: an early gas engine, the four-stroke cycle, an engine built into a car, or Diesel's engine, which ignites fuel by compression instead of a spark.

An internal combustion engine burns its fuel inside the engine itself. The U.S. Department of Energy (DOE) describes combustion as the process of releasing energy from a mixture of fuel and air, with the engine turning part of that energy into work. This article tells who did what and when. For how the parts work, see how a gasoline engine burns fuel, and for the fuels themselves, the history of fuels from wood to oil.

1860 to 1876: from a gas engine to the four-stroke cycle

In 1860 Étienne Lenoir took out patents for a gas engine. A Science Museum Group drawing of his igniter, which relates to those patents, notes that the ignition coil of his engine made the spark that triggered combustion. The museum also holds an 1860 Lenoir gas engine among its heat engines other than steam.

The next step came from Germany. The Science Museum Group says that in 1876 Nikolaus August Otto built the first four-stroke engine, and that his design improved on the noisy atmospheric engines of the time, which had limited power. It calls the Otto engine the first practical alternative to the steam engine. The museum adds that compressing fuel and air before ignition, which Otto's design did, is still the principle in every present-day internal combustion engine.

The four strokes are intake, compression, combustion with the power stroke, and exhaust, in the DOE's wording. DOE says most internal combustion engines use this four-stroke cycle.

1883 to 1886: engines small enough for vehicles

A heavy stationary engine is not much use on a road. The Deutsches Museum credits Gottlieb Daimler and Wilhelm Maybach with the first high-speed engine of small dimensions that was suitable for installation in vehicles. Its catalog dates the invention to 1883 and the building of the engine to 1885, and gives 650 revolutions per minute and 0.8 kW (1.1 hp).

In the same years Karl Benz built a three-wheeled motor car in Mannheim. The Henry Ford museum says historians generally credit it as the first self-propelled vehicle designed around an internal combustion engine, and dates the original to 1885. The Deutsches Museum lists the Patent-Motorwagen under 1886, the year Benz applied for a patent on a "vehicle with gas engine operation." The two museums differ by a year, one dating the build and the other the patent application. The Deutsches Museum's data describe a one-cylinder four-stroke engine of 984 cm³ (about 60 cubic inches) making 0.66 kW (0.88 hp), a top speed of 12 km/h (about 7.5 mph), a weight of 265 kg (about 584 lb) and a liquid fuel such as petrol.

Milestones in the early history of the internal combustion engine, as recorded by museums and U.S. agencies.
YearMilestoneDetail
1860Lenoir patents a gas engineAn ignition coil supplied the spark
1876Otto builds what the Science Museum Group calls the first four-stroke engineFuel and air are compressed before ignition
1883 to 1885Daimler and Maybach design, then build, a small high-speed engine650 rpm, 0.8 kW (1.1 hp), suited to vehicles
1885 to 1886Benz Patent-MotorwagenOne cylinder, four strokes, 0.66 kW (0.88 hp)
1892 to 1897Diesel patents, builds and tests his engine26.2% of the fuel's heat became useful work in 1897
1970Clean Air Act passed in the United StatesEmission standards later drive new engine technology

1892 to 1897: Diesel and compression ignition

Rudolf Diesel took a different route to the same goal. The Deutsches Museum dates his invention to 1892 and lists a patent from that year, number 67207, which in translation is titled "working method and design for internal combustion engines." A prototype was completed in 1896. Acceptance tests in February 1897 showed, in the museum's words, a good efficiency: 26.2% of the heat in the fuel was converted into useful work, and soon afterward the same engine reached 27%. The arithmetic is plain, 100 - 26.2 = 73.8, so almost three quarters of the fuel's heat did not become useful work. The museum also lists air-blast fuel injection among the engine's technical data.

What set the diesel apart is how the fuel ignites. DOE explains that a diesel engine draws in only air and compresses it, then sprays the fuel into the hot compressed air, which makes it ignite without a spark. A gasoline engine instead compresses a fuel-air mixture and lights it with a spark. The details are in how diesel engines ignite fuel. To see how the two fuels differ in common units, compare gasoline and diesel.

From 1970: the same principles, new controls

The core ideas set out between 1860 and 1897 are still in use. What changed in the twentieth century is how cleanly engines run. The U.S. Environmental Protection Agency (EPA) says Congress passed the Clean Air Act in 1970 and that emission standards led to many modern automotive technologies. EPA began phasing lead out of gasoline in the 1970s, and leaded gasoline was fully prohibited after 1995. EPA also reports that new cars, SUVs and pickup trucks are roughly 99 percent cleaner for common pollutants than 1970 models. What those pollutants are is explained in air pollutants from burning fuels.

Common mistakes

  • "Karl Benz invented the internal combustion engine." Engines were already running before his car. Lenoir patented a gas engine in 1860, and in 1876 Otto built what the Science Museum Group calls the first four-stroke engine. Benz is credited with building a vehicle around such an engine.
  • "A diesel is a gasoline engine that burns a different fuel." The two differ in how the fuel ignites. A diesel compresses air alone and sprays the fuel into it, and a gasoline engine uses a spark.
  • "There is one agreed date for the first car." The Henry Ford museum dates Benz's original to 1885, while the Deutsches Museum lists the Patent-Motorwagen under 1886.
  • "The four-stroke cycle came with the automobile." Otto's four-stroke engine of 1876 came first, and the car-sized engines of the 1880s built on it.
  • "The engine stopped changing after the 1890s." The basic cycles stayed, but EPA reports that new passenger vehicles are roughly 99 percent cleaner for common pollutants than 1970 models.

Frequently asked questions

Who invented the internal combustion engine?

No one person did. Étienne Lenoir patented a gas engine in 1860, Nikolaus Otto built a four-stroke engine in 1876 that the Science Museum Group calls the first, Daimler and Maybach made a small high-speed engine for vehicles in 1885, and Rudolf Diesel patented his engine in 1892. Each added a step, so the answer depends on which milestone you count.

What was the first four-stroke engine?

The Science Museum Group says Nikolaus August Otto built the first four-stroke engine in 1876. It repeats intake, compression, power and exhaust strokes, and compresses the fuel and air before ignition. The museum calls it the first practical alternative to the steam engine and notes that the same compression principle is used in all present-day engines.

When was the diesel engine invented?

The Deutsches Museum dates Rudolf Diesel's invention to 1892, the year of his patent. A prototype was completed in 1896, and acceptance tests in February 1897 showed that 26.2% of the fuel's heat was turned into useful work. So 1892, 1896 and 1897 are all defensible dates, depending on whether you mean the patent, the build or the proof.

What was the first car with an internal combustion engine?

Historians generally credit the Benz Patent-Motorwagen, according to the Henry Ford museum, as the first self-propelled vehicle designed around an internal combustion engine. The Deutsches Museum describes a one-cylinder four-stroke engine running on a liquid fuel such as petrol. Museums date it to 1885 or 1886, depending on whether they count the build or the patent.

Sources

Spotted something wrong or out of date? Tell us through the corrections page. We answer within 10 business days.